Putting light on how orders for 3D printing process can be made hassle free, Mr. Yash Rane, the Sales’ Head at Chizel, has shared a vital piece of information, in a sense to maintain and restore consumers’ faith in 3D printing and its marvelous applications. The agenda being, while placing an order for 3D printing, how a consumer can bridge the information shortfall between them and the 3D printing vendors which otherwise might probably cause miscommunication, if not paid attention to, leading to the loss in time and money on everyone’s behalf. This, in turn, might adversely affect consumers’ faith in 3D printing when they are not being delivered what they expect out of it.
This is what he explains and suggests, a consumer should focus on when placing an order for 3D printing:-
“Prototyping is the need of the hour, and people demand it to be done impromptu. We have catered to more than 70+ design studios till date, and what we have observed is that there is a lot of communication gap between the designers and the 3D printing service bureaus. At times, such miscommunication costs time, money, and eventually faith of the designers.”

These are three critical points to be focused on while placing an order for 3d printing process:

  1. Do not discuss the technical name of 3D printing materials. Leave that for the service bureau.

    It gets really messy as every machine comes up with their own brand name of the material. For example, Accura 25 of 3D Systems and ABS 3650 of Prodways have essentially same materials properties (similar to ABS). Both of these materials are ten times expensive than ABS materials used in  FFF( fused filament fabrication) technology. Hence, rather than placing a request for a specific material, always mention what kind of application you are looking out for. For instance, a form testing part can be easily made by FFF technology rather than making it in SLA technology, saving you a lot of money.”
  2. Designs are mostly CAD modeled, considering that it will be mass manufactured using injection molding process.

    In injection molding, we can reach dimensions as critical as 0.2 mm with decent strength. This does not happen in 3D printing. Though there are new technologies that can give you features as small as 0.1 mm, they might not have the required strength. So eventually, you may end up compromising upon certain features which may be critical to your component. Hence, always make your vendor understand the critical dimensions of the component and your priority towards certain parameters. By changing layer thicknesses, orientation and by designing special support structures at the vendor’s end, they can help you in achieving the required parameters.”wallthicknesstongue
  3. A good prototype takes time

We at Chizel can guarantee 2 days delivery when there are no design modifications and no post-processing involved. With an additional requirement of post processing or design modification, the time required to deliver the product increases, also the probability of the part to fail while it performs, falls down drastically, ensuring that you get the best quality of prints for your parts. Hence, always mention how much lead-time flexibility you can afford for the prototype and the additional post processes you might need.

Happy Prototyping !!!

“You can always vouch for further discounts to your vendors if you give them the flexibility of more than 5 days for prototyping. Trust me, it WORKS !!! “